Glossary entry (derived from question below)
Jun 10, 2008 17:01
15 yrs ago
4 viewers *
Croatian term
piketiranje
Croatian to English
Tech/Engineering
Ships, Sailing, Maritime
refit (remontno brodogradilište)
Nažalost, nemam konteksta, ovo je samo jedna od nabrojenih stavki.
Proposed translations
(English)
5 +1 | chipping | zoran rukavina |
4 -1 | grinding | ivanamdb |
Proposed translations
+1
17 hrs
Selected
chipping
chipping-otucanje rđe, piketanje
chipping hammer-piketina
rječnik pomorskih izraza i termina
chipping hammer-piketina
rječnik pomorskih izraza i termina
Peer comment(s):
agree |
Larisa Djuvelek-Ruggiero (X)
1 day 7 hrs
|
hvala
|
4 KudoZ points awarded for this answer.
Comment: "Da, to je to, a strojno se radi "needle gun-om"."
-1
16 hrs
grinding
ostaviti cu prijasnji odgovor, tako da ostanu linkovi i objasnjenja
(hvala eleonora!)
--------------------------------------------------
Note added at 20 hrs (2008-06-11 14:01:01 GMT)
--------------------------------------------------
I politely beg to differ.
ako pogledate ovdje, gdje tocno opisuje proceduru cistenja i bojanja broda:
Metal Grinding Processes – Metal grinding is generally accomplished using stationary grinding machines
in the shop, and handheld portable grinders outside. Outside grinding operations have the greatest
potential for the discharge of pollutants that may be exposed to rainfall, because shop operations are
typically performed in-doors.
• Portable Grinders – Portable grinders are generally available in two types (i.e. electric and
pneumatic) depending upon the source of power to turn the grinding disc. Both processes will be
essentially identical with regards to the source and types of pollutants. Pollutants will be derived
from both the abrasive, and from the substrate being ground.
• Needle Gunning – Needle gunning and scaling is the process of using a “needle” impact gun
against the substrate, which breaks and chips away the relatively loose coating, scale, slag, etc.
Needle gunning does not use abrasive grinding materials and, therefore removes that potential
source of pollutants. The particle size of the waste stream also tends to be significantly larger than
that generated by grinding. Significant disadvantage to needle gunning is its slower production
rates and its inability to achieve the types of surface finishes that can be produced by grinding.
• Flapper Scalers
• Dyna-scalers
gdje je grinding cijelokupni proces struganja ruzine, iako postoji i "sanding" sto bi bas bilo brusenje. NEEDLE-GUNNING, sto sam u prvom odgovoru medju ostalim i predlozila bi bio specificno, tj. vrsta tucenja ruzine s novim alatima a ne samo s cekicem (sto vise ne rade ni u splitskom brodogradilistu). Needle gunning je u biti sinonim pneumatic chipping.
--------------------------------------------------
Note added at 21 hrs (2008-06-11 14:03:16 GMT)
--------------------------------------------------
http://en.wikipedia.org/wiki/Needlegun_scaler
(hvala eleonora!)
--------------------------------------------------
Note added at 20 hrs (2008-06-11 14:01:01 GMT)
--------------------------------------------------
I politely beg to differ.
ako pogledate ovdje, gdje tocno opisuje proceduru cistenja i bojanja broda:
Metal Grinding Processes – Metal grinding is generally accomplished using stationary grinding machines
in the shop, and handheld portable grinders outside. Outside grinding operations have the greatest
potential for the discharge of pollutants that may be exposed to rainfall, because shop operations are
typically performed in-doors.
• Portable Grinders – Portable grinders are generally available in two types (i.e. electric and
pneumatic) depending upon the source of power to turn the grinding disc. Both processes will be
essentially identical with regards to the source and types of pollutants. Pollutants will be derived
from both the abrasive, and from the substrate being ground.
• Needle Gunning – Needle gunning and scaling is the process of using a “needle” impact gun
against the substrate, which breaks and chips away the relatively loose coating, scale, slag, etc.
Needle gunning does not use abrasive grinding materials and, therefore removes that potential
source of pollutants. The particle size of the waste stream also tends to be significantly larger than
that generated by grinding. Significant disadvantage to needle gunning is its slower production
rates and its inability to achieve the types of surface finishes that can be produced by grinding.
• Flapper Scalers
• Dyna-scalers
gdje je grinding cijelokupni proces struganja ruzine, iako postoji i "sanding" sto bi bas bilo brusenje. NEEDLE-GUNNING, sto sam u prvom odgovoru medju ostalim i predlozila bi bio specificno, tj. vrsta tucenja ruzine s novim alatima a ne samo s cekicem (sto vise ne rade ni u splitskom brodogradilistu). Needle gunning je u biti sinonim pneumatic chipping.
--------------------------------------------------
Note added at 21 hrs (2008-06-11 14:03:16 GMT)
--------------------------------------------------
http://en.wikipedia.org/wiki/Needlegun_scaler
Peer comment(s):
disagree |
zoran rukavina
: grinding je brušenje, a Eleonorin R. brat je u pravu,
26 mins
|
btw procitajte moj razgovor s eleonorom i objasnjenja.cheers
|
Discussion