Glossary entry (derived from question below)
English term or phrase:
pattern bit
Romanian translation:
freză cilindrică cu coadă şi rulment sus
Added to glossary by
Alexandranow
Aug 30, 2013 09:52
10 yrs ago
English term
pattern bit
English to Romanian
Other
Art, Arts & Crafts, Painting
woodworking
After sizing the cleats to about 1/8 in. longer than
the finished size, use a template-rounding jig and
a pattern bit to reach the finished length, rounding
the ends at the same time (E).
Install the supports between the edge strips at
the desired height. The finished shelf sits on top
of the supports (F). You’ll have to notch the shelf
to fit it around the edge strips.
the finished size, use a template-rounding jig and
a pattern bit to reach the finished length, rounding
the ends at the same time (E).
Install the supports between the edge strips at
the desired height. The finished shelf sits on top
of the supports (F). You’ll have to notch the shelf
to fit it around the edge strips.
Proposed translations
(Romanian)
4 | freză cilindrică cu coadă şi rulment sus | crocox |
Proposed translations
1 day 13 mins
Selected
freză cilindrică cu coadă şi rulment sus
'Pattern bits have ball bearings mounted at the top of the cutter. A bearing rides against the shape of the pattern and replicates it into the material clamped beneath.'
http://www.ohio.edu/people/schneidw/audio/veneer_trimming_re...
' The bit on the left is a standard pattern bit with the carbide cutter running parallel to the axis of the bit.'
http://out-of-woods.blogspot.ro/
' The bit has been equipped with guide bearing...'
'Freze cu coada pentru executare uluce si indreptat cant, cu rulment ce poate copia modelul unui sabon. Pot fi folosite in lemn masiv de esenta moale sau tare, sau in PAL'
http://www.sculelemn.ro/Freze_cu_coada,_cilindrico-frontale,...
http://www.ohio.edu/people/schneidw/audio/veneer_trimming_re...
' The bit on the left is a standard pattern bit with the carbide cutter running parallel to the axis of the bit.'
http://out-of-woods.blogspot.ro/
' The bit has been equipped with guide bearing...'
'Freze cu coada pentru executare uluce si indreptat cant, cu rulment ce poate copia modelul unui sabon. Pot fi folosite in lemn masiv de esenta moale sau tare, sau in PAL'
http://www.sculelemn.ro/Freze_cu_coada,_cilindrico-frontale,...
Note from asker:
minunat, many thanks (nici nu mai speram) |
4 KudoZ points awarded for this answer.
Discussion